Magnetic Tape Replacement  

DISK+TAPE Virtual Tape drive

DISK+TAPE Virtual Tape drive is an electronic unit that emulates a legacy tape drive, but stores data to either removable SCSI disk or to industry standard Compact Flash (CF) cards.

Many legacy tape drives are no longer manufactured and tape repair houses are finding it increasingly difficult to obtain spare parts.

Some applications are written to only operate with a specific type of tape drive, which yields a problem when the drive fails and cannot be repaired.

The Avax Disk+Tape product is a small stand-alone disk based product that emulates a variety of legacy SCSI tape drives and will plug & play with these applications.

FEATURES
· A Virtual SCSI Tape Drive Emulation for a SCSI Disk, or Flash Disk
· Emulates 3490E, IBM3590, DLT4000 DAT, 8MM, AIT, QIC and 9 track SCSI tape drives
· Zero tape positioning times – useful for quick file positioning when reading the “tape”.
· Removable Disk drive can be treated as a single tape media
· Disks can be any size from 1Gb to 500Gb
· Disks can be solid state Compact Flash cards (see image at right) — providing rugged and readily available media.
· Eliminates problems of slow backups shoe-shining the tape drive, which eventually leads to failures.
· Can be dual-ported so that two or more Hosts can share the unit.
· The disk itself can also be saved back to a regular tape drive in an off-line fashion.— simply connect the tape drive and select this function in the menu.
· Simple Plug & Play installation
· A small, lightweight alternative to a real tape drive.
· Informative front panel LCD display shows current

   -   Download the DISK+TAPE Virtual Tape drive data sheet in Adobe Acrobat® format.




........................................................................



The new DS-1000 (Magnetic Tape Emulator) and DS-2000 (Data Server) systems are a direct replacement for 1/2" and DAT tape drives. The MTE units are compatible with systems that use either Pertec or SCSI connection to the host.

Systems that currently log to magnetic tape, or require input from legacy tape drives can now use the Magnetic Tape Emulator and either write the data to CD/DVD or transmit it over intranet/internet for remote collection.

Model DS-1000 is for general applications and model DS-2000 is intended for telecom switches. A DS1000 unit has recently been successfully installed to replace a Kennedy 9100 as the data logger on a Siemens-Westinghouse WDPF system at a power generator, as well as replacing magnetic tape inputs on Scitex 3000 pre-press units and on various machine tools.



The DS2000 Data Server has been fully tested on the following telephone switches:

Alcatel System 12, Alcatel E10, NEC Neax61E/K, Neax Sigma, Lucent 5ESS 3B20, Lucent 5ESS B21, Siemens EWSD, Ericsson AXE10, Fujitsu F150, Nortel DMS100, Nortel DMS10, NEC NEAX61E.

NOTE: If your switch is not on the above list, please contact us as switches are being added almost continuously.

If you require a tape emulation unit for a Telco switch other than those listed above, we will be happy to discuss what needs to be done to make the product work for you.

For more information:

   -   Read more about Telecom Solutions .
   -   Download the DS-1000 Magnetic Tape Emulator data sheet in Adobe Acrobat® format.
   -   Download the DS-2000 Data Server data sheet in Adobe Acrobat® format.
   -   Download a copy of a DS-1000 case study (DS-1000 on high speed printer)

Back to Top

Tell your friends about this page! Please address general feedback regarding the web site to: Copyright © 1997-2006. Telephone: (519) 833-2900 · (800) 443-4542 Facsimile: (519) 833-7469